THIS IS THE FORD-15 PAGE
FORD
302 — 300HP/322HP/340HP TURNKEY
ENGINES
fORD 351W — 280HP/300HP/325HP/
345HP/353HP/360HP TURNKEY
ENGINES
MIDNIGHT TURNKEY ENGINES for
FORD BRONCOS and 4X4 TRUCKS
SUCH AS
Ford F100
|
Ford F150 |
Ford F250 |
Early Fords:
F1 F100 F150 |
FORD BRONCOS |
THIS PAGE SHOWS OUR
1015 SERIES 4 X 4 FORD 302
and
351 WINDSOR 4 X 4 ENGINES!
Basic Pricing:
1015 SERIES 4 X 4 FORD 302:
Ford 302 — 300 HP:
340 ft lbs torque $4995
(Cam has lots of vacuum for power brakes! - CALL for your choice of two cams.)
Turnkey package with small diamater distributor,
etc. $5495
Ford 302 — 322 HP:
350 ft lbs torque $5195
(Cam has a LOT of vacuum)
Turnkey package with small diamater distributor,
etc. $5695
Ford 302 — 340 HP : 361- ft
lbs torque $5395
(Less vacuum but still 4x4, a little more
aggressive cam. Great sound for your Bronco or 4X4.)
Turnkey package with small diamater distributor,
etc. $5895
Torque ranges will vary depending upon cam and application.
Click HERE to see more Bronco engines!
1015 SERIES 4 X 4 351 WINDSOR:
Ford
351W — 280HP: 341
ft lbs torque $4995
(Best vacuum, great low end and mid range and mileage.)
Ford
351W — 300HP: 361 ft lbs torque $ 5195
(Good vacuum, great low end and mid range with more torque)
Ford
351W — 325HP: 375
ft lbs torque $5395
(Great vacuum, great low end and mid range and mileage.)
This is one of the best for mid towing!
Ford 351W — 345HP 385
ft lbs torque $5595
(This one has good vacuum, great low end and mid range and mileage.)
This is one of the best for mid to heavy towing!
Ford 351W — 353HP 390-395
ft lbs torque $6295
Please note there are several cam choices that we recommend for this towing package, please call.
(Good vacuum, great low end and mid range.)
This one is the best for mid to heavy towing -- more torque!
Ford 351W — 360HP 400-410
ft lbs torque $6795
(Fair vacuum, good low end, mid range and top end.)
This one is best for mid-heavy towing and more torque.
This engine is designed more for the "toy" application.
This is a great Bronco toy engine, highly recommended by Bronco Clubs and 4 X 4 Clubs.
CHECK
OUT OUR 347 STROKER ENGINES:
Ford 347 STROKER
ENGINE 375HP: $6795 — 385 ft lbs torque
THIS IS OUR PERFORMANCE ELITE
SERIES!
Ford 347 STROKER
ENGINE 408HP: $6995 — 395 ft lbs torque
THIS IS OUR PERFORMANCE ELITE SERIES!
Ford 347 STROKER
ENGINE 427HP: $7595 — 402
ft lbs torque
THIS IS OUR PERFORMANCE
ELITE SERIES!
Call for availability.
Please note these
347 Stroker engines are Forged Piston Engine Turnkey
packages. |
LET'S GO ROLLER!®
ASK ABOUT OUR ROLLER
CAM PACK® UPGRADES! |
NEW UPGRADES AVAILABLE:
- HOLLEY SNIPER FUEL INJECTION SYSTEM
- SERPENTINE PULLEY SYSTEM
CALL US FOR DETAILS! |
Ask
about our Fast Track Startup:
That means this engine can be Real
Ready to Run OUT OF THE BOX if you choose our Fast
Track startup, which includes break in, super tuning, jetting, and more.
If you choose a Fast
Track Start Up, we have special pricing right now!
Watch this short sample video:
This
Power 2® and Power 3® four-by-four
engine combination is great for your Bronco or custom
4 X 4 Ford truck.
All our engines are custom HAND
BUILT by professionals in our machine shop!
*Please note that the stock converter will
work on most of these 4X4 engines, except for some of the more
aggressive engines. Please call us for details.*
This Power 2® and Power 3® Engine
Combinations are great for the everyday driver, in your Custom
Truck, 4x4, JEEP or Ford Bronco.
SPECIAL
FEATURES include:
- Howards or Comp Cam Kit (great old school sound!)
(Ask about upgrading to a Roller Cam!)
- SEAL POWER/Speed Pro heavy duty pistons
(piston application can vary depending upon horsepower)
- Compression pistons is 8.1 to 1.
Higher HPs are 9.5 to 1 for pump gas.
- Ford cast iron heads with hardened exhaust seats.
- Also available as an upgrade are our recommended
Aluminum Heads.
- STEEL FORGED RODS 302 Ford Bronco rods (higher horsepower
engines also include ARP bolt kit)
- NODULAR CRANK Pro Turn micro polished
- NODULAR CRANK Pro Turn Micro Polished
- Your choice of Edelbrock 600, 650 or 750 CFM electric choke
or Holley 600 to 750 CFM electric choke.
(some engines may require higher CFM carb)
- Choice of 5 distributors:
Pertronix Stage 1 is included in price;
Pertronix Billet Stage 2 is extra;
Pro Street HEI distributor is included;
MSD 2 pack is extra;
MSD 6AL 3 pack is extra.
- Plugs, Plug wires. Call for colors!
- PER® Pro 7" High Performance Harmonic Balancer
- Chrome valve covers included.
Aluminum Bronco valve covers are extra.
- New chrome air cleaner included. Custom air cleaners extra.
- Water pump is standard, high volume is extra. (You must
keep your own water pump pulley and balancer pulley.)
- Bronco oil pans are available for an extra charge for your
4x4 or Bronco engine.
(Custom oil pans are available for an extra charge.)
- New Aluminum Timing cover.
- This engine will run on 89 or 91
Premium unleaded fuel.
- New P.E.R.® HP harmonic balancer.
- Call for info on flex plate or fly wheel.
- Call for info on standard transmissions (4, 5,
or 6 speed, etc).
- This engine is a seasoned block, hand picked for each engine
application.
- Built based on one of our Dyno tested
and road proven packages.
- Call for engine colors. (Standard enamel
colors are no charge.)
ENGINE
PARTS include:
- Power 2® or 3® Comp or Howards Cam cam kit
- Power 3® hydraulic lifters,
Seal Power, Comp or Howards
- Trick Flow spring set, heavy duty
- Heavy Duty Steel Stem intake valves
- Heavy Duty Steel Stem exhaust valves
- Premium positive valve seals, Blue
Viton
- Controlled internal oil system (a PER® exclusive!)
- Melling Heavy duty stock or high volume oil pump
- Melling Heavy duty steel collar oil shaft
- Melling oil pickup screen
- High quality American Speed Pro or Seal Power Heavy
Duty pistons
- P.E.R.® Speed Pro plasma molly
rings
- Brass freeze plug kit and oil gallery kit
- High quality rear main seal, double lip
polyacrylate
- Fel Pro PermaTorque heavy
duty gaskets and gasket set
- King or Clevite main bearings,
Real Tri metal, high quality
- King or Clevite rod bearings,
Real Tri metal, high quality
- New rod nuts installed
- Cam bearings, high quality 360 Set
- Fuel pump not included.
- Starter not included.
- Headers not included.
- Don't forget to call us for pricing on Fast Track
Start up and Break-in!
MACHINE
LABOR includes:
- P.E.R.® 4-anglevalve
job
- Mill-matching surfaced iron heads
(You can ask for an upgrade to new aluminum heads!)
- Heavy duty thick wall valve guides
- Valve guides custom cut for posi-seals
- Blocks are furnace burned to thoroughly
clean the engine blocks, and then are shot abraided.
- Jet vat block and magnifluxing
- Blocks are furnace burned and shot abraided, for super clean outside and inside of water jackets
- Remove and replace all freeze plugs
- Remove and replace gallery plugs
- Remove and replace cam bearings
- Custom centerline boring
of block
True 90 degree V8 centerline
boring
- Power hone to fit pistons and rings
- Custom crank micro polish, radius oil holes
- Rods pressed off, then heat fitted
- Rods checked for alignment
- Spin balancing and blueprinting
ALSO CALL ABOUT OUR NEW
KEITH BLACK PISTON ENGINES!
SOME
ASSEMBLY IS NEEDED.
YOU
WILL NEED to call us - There are
too many variables on each application.
For
any changes needed, just call and we will build
a custom engine package for you with the horsepower
you want. You can also change the color, choosing
from over 25 different colors.
All our engines are custom HAND
BUILT by professionals in our machine shop!
Warranty, Deposit, and Shipping Info:
This engine has a one
year written warranty. Buyer pays actual shipping costs if
unable to pick up engine from our shop in Phoenix AZ. Some
state freight restrictions apply. DEPOSIT
REQUIREMENT IS 60% DOWN, PAYMENT IN FULL WHEN ENGINE IS DONE.
(GET A DISCOUNT WITH A DIRECT DEPOSIT!) We accept Visa,
Mastercard, Discover, American Express, money orders, cashier's
checks, and direct deposit. Business
or personal checks must clear prior to shipping. Arizona residents
must add 8.6% sales tax.
Please call for core requirements.

Call to order this engine:
602-866-8044
Monday through Thursday: 8:30am - 5:00pm
Friday 08:30am - 4:00pm
Saturday: BY APPOINTMENT ONLY
Sunday: Closed
Times listed are Arizona (Mountain Standard time year
round.)
DID
YOU KNOW?
At Phoenix Engine, every Power Engine® is
CUSTOM rebuilt in our machine shop by P.E.R.® professionals,
from start to finish. The Power Engine® Performance
Combination was developed from our over 50+ years of experience
on MUSCLECARS, STREET STRIPS, CUSTOM TRUCKS, 4x4s, HOT RODS,
CUSTOM MODS, JEEPS, and RESTORATIONS. Established in 1973,
PhoenixEngine.com has built over 250,000 quality engines
to date.
Please be sure to read our full Disclaimer:
CLICK HERE.
6/9/25
6/10/25
8/2/25txt
8/3/25 txt
8/6/25 txt code
8/7/25 rem/repl vid, txt
|

Click to enlarge photo

Click to enlarge photo

Click to enlarge photo

Click to enlarge photo

Click to enlarge photo

Click to enlarge photo

Click to enlarge photo
Ask for a serpentine pulley system upgrade!


Ask about upgrading to a Holley Sniper fuel injection system!


Ask about the advantages of an optional Holley
Sniper Fuel Injection System! 
* Note: When we custom build your engine,
you can choose from over 25 different colors or you can
supply the paint to have your engine painted the same color
as your car's finish!
Please note photos may vary from actual product as all our engines
are custom built.
|