This is the Automotive Machine Shop page for Phoenix Muscle Car, Phoenix Engine Rebuilders, Phoenix Engine Exchange. Rebuild your engine at Phoenix Engine.com.

Don't forget to ask about our
Chevy and Ford Small Block Engines
Voted best pricing for the past five years!

CLICK HERE TO SEE OUR FULL ENGINE CATALOG !

General Automotive and Custom Machine Shop

An engine being rebuilt at Phoenix Engine RebuildersPhoenixEngine.com has a complete automotive machine shop for your stock engine, up to custom builds for your muscle car or 4x4.
Below are a few of the most common requests with the estimated cost. Please call us at 602 866-8044 for a customized estimate for your specific vehicle.

Call us for Custom Engine Kit pricing!


    General Automotive and Custom Machine Shop
    (pricing subject to change without notice :

  • Small Block Valve Jobs:
    3 angle® stock small block V8 valve job, from $249.50
    4-angle® HP small block V8 valve job,    from $299.50
    5-angle® HP small block V8 valve job,    from $349.50
    Does not include valve guides, springs, seals, any parts the head needs.

  • Big Block Valve Jobs:
    3-angle® stock big block valve job, from $249.50
    4-angle® HP big block valve job,     from $349.50
    5-angle® HP big block valve job,     from $399.50

    Does not include valve guides, springs, seals, any parts the head needs.

  • Furnace burn to thoroughly clean your block, and then shot abraiding process, small block will be $159.50
    Jet clean your engine block, small block (V8 small blocks) from $89.50

  • Furnace burn to thoroughly clean your block, and then shot abraiding process, big block will be $199.50
    Jet clean your engine block, big block (Chevy, Ford, etc) from $119.50

  • Remove and replace cam bearings (V8 small blocks), from $49.50

  • Remove and replace cam bearings (big blocks), from $59.50

  • Remove and replace freeze plugs (V8 small blocks), from $49.50

  • Remove and replace freeze plugs (big blocks),  from $59.50

  • Remove and replace oil gallery plugs,
    for stuck and frozen gallery plugs and drilling out
    price is based on time basis (i.e., 1/2 hour time basis is $59.50, 1 hour base would be $99.50).
    This is for drilling and tapping out oil gallery plugs.

  • Press off and heat fit engine rods, small blocks  (V8 small blocks) from $119.50

  • Press off and heat fit engine rods, big blocks, from $139.50
    This also includes checking the rods for alignment.


    Crank Grinding:

  • Basic V8 crank grinding: small block from $199.50

  • We do custom crank grinding, also debur for stress and chamber oil holes and radius grind.
    Pricing starts at $299.50.

  • 350 Chevy cranks, from $199.50

  • 383 Chevy stroker cranks, from $349.50

  • 302 Ford cranks, from $199.50

  • 302 - 331 Ford stroker cranks, from $349.00

    Bore and Hone:

  • Stock bore, from $149.50

  • Bore on center (performance bore), from $199.50

  • Power hone to fit performance pistons and
    custom fit piston to each cylinder, for V8: from 149.50

  • Power hone to fit performance rings, file fit
    and custom fit to each cylinder, for V8: from $149.00 per hour

 

Balancing the Engine:

  • Custom Street Balancing® small block, from $249.50

  • Custom Street Balancing® big block, from $299.50

  • Custom spin balancing small block engine for race, from $299.50

  • Custom spin balancing big block engine, from $349.50

  • Custom spin balancing for racing for stroker engines starts from $249.50
    Note: Custom work such as adding heavy weight or internal/external balancing is pro rated per hour.

    Attention Do-It-Yourselfers:

  • If you have already purchased your performance engine kit, we will be happy to do all the custom machine work for your engine.

  • Call PhoenixEngine.com at (602) 866-8044 for all your stock to custom or restoration machining.

    Machine Shop Rates:

  • Standard machine shop rate starts at $99.00 per hour for basic stock engines.

  • Custom machine shop rate is $149 per hour (for instance, fly cut performance pistons, custom fit, or custom fit cam bearings). Example: any performance engines whether small horsepower, 300HP, 400HP, 500HP and up, etc. is considered custom engine work.

    For example, tear down of any engine time basis is $149.00 minimum per hour, taking pictures and logging pictures in the system is $149.00 per hour, moving pictures to DVD storage in the computer, any extra time involved during inspection of teardown is all by the hour, no exceptions.

    A good example is how we tore down a 427 Corvette engine. The customer wanted to keep all the original parts. This involved more time in categorizing all the original parts so that he received pictures and detailed information of what he dropped off.

    This does not include any machine work performed, does not include time on paperwork, does not include cleaning the block, going through the burn process and then cleaning the block through the shot abraiding process, glass beading, and then jet vatting whether it's heads, block, miscellaneous parts, etc. All of this operation is extra cost.

    If any stop work or cancellation is requested by the customer, or stop work is ordered by us, there will be fees involved. No exceptions.


Don't forget to ask about our
Chevy and Ford Small Block Engines
Voted best pricing for the past five years!


 

PhoenixEngine.com
21632 N 7th Ave, Suite 1, Phoenix AZ 85027

SW corner of 7th Ave & Deer Valley Rd,
right across from Deer Valley Airport entrance.

602 866-8044
email: [email protected]

 

NAVIGATION MENU

HOME PAGE

Engine Catalog (All Engines)

Muscle Car Engines

Pickup/4x4/Jeep/Van

Stock Engines

Machine Shop

FAQ

About Us

Criteria

Contact Us

Testimonials

 


Disclaimer: Please note that any information on this website, including pricing, is deemed accurate but is not guaranteed. Any pricing information is presented as a guideline only; you must call or email us for a customized estimate. Thank you.


Above pricing is a guideline, and may not be current. Please call us for a customized estimate!