CHEVY 350 — 270/282/310 HP-C (computer-driven)
MIDNIGHT CRATE ENGINE for Chevy trucks
and some Throttle Body Injection (TBI) cars.
In response to customer requests,
we now have a new program with
FiTech and 4-barrel injection!!
We've been testing and converting the 2 barrel throttle body to the 4 barrel injection systems which are much more efficient and modern, and create a better torque band and horsepower, and fuel efficiency.
Easy installation and conversion for trucks and cars. Please look at the pictures to the right, and call us for pricing. >>>>
A "Crate Engine " means "Intake
to Pan." Just give us a call if you'd like this engine
in a TURNKEY package!
Turnkey package includes
custom chip, blueprinted throttle body, distributor, plugs,
and spark plug wires. Additional cost for a turnkey package
is varied, depending upon your vin code and your chip's
alpha code. See pricing below.
Please note this Power Engine will work with just a custom chip.
We do recommend the whole turnkey package however because of
mileage and wear. (Note: Does not include serpentine pulley
THIS IS A LIMITED TIME SALE PRICING
The normal price of these engines is $100 more. Buy now to receive the special
350ci 270 HP = $ 2795 <<< best
Additional cost for turnkey package = $1095, $1195 or $1295 *
* Depending upon your VIN number and alpha code number (A, B, C, D.) on your computer chip.
350ci 282 HP = $ 2895
Additional cost for turnkey package = $1095, $1195 or $1295. *
350ci 310 HP = $ 2995 <<< featured in photos
Additional cost for turnkey package = $1195 or $1395. *
(Good vacuum, good to medium pulling power for trailers, etc.)
350ci 270 HP = torque spec up to 325 ft lbs
350ci 282 HP = torque spec up to 345 ft lbs
350ci 310 HP = torque spec up to 355 ft lbs
These engines ARE emission friendly in
We are in the process of dyno testing this engine! One of our
new upgrades - please remember we are one of the few in the
country that can dyno test TBI (throttle body injection) engines,
and TPI (tune port injection) engines. Your engine will be built from this dyno package! We can also dyno test your specific engine for an additional charge.
Please note that we highly recommend the computer upgraded chips
for your best mileage and performance. The unique advantage
with these are the engines will run on pump gas!
SALE SPECIAL: We are now offering
these same engines with the Second Generation Vortec head, which
is from 1996 to 2002 with the 8-bolt intake.
Please note that the 8-bolt intake is an extra cost.
for the heads on this motor is $495 base price.
(Eight-bolt intake and adapter is extra.)
our Fast Track Startup:
That means this engine can
be Real Ready
to Run OUT OF THE BOX if
you choose our Fast Track startup, which includes
break in, super tuning with a house carburetor
and distributor. We have designed
a custom CNC adaptor that bolts on the TBI intake
so we can bolt on a 4 barrel carburetor to do the
initial break-in. This provision allows us to break
in the cam, adjust the valves, re-torque the heads,
and do a thorough inspection of the engine during
the break-in process. Also realize that we use
a fast fuel computer system to tune the engine
with the computerized cam that is in the motor
we have chosen for your application. We also degree
our cams, which 90% of other companies
do not take the time to do.
Please note that we have been GM,
truck, car, Corvette, and throttle body injection
and tune port injection specialists and innovators
for these types of engines for many years.
you choose a Fast Track Start Up, we have special
pricing right now!
HERE to learn more
FAST TRACK, and
to view a sample video.
This Power 2® Engine Combination would be GREAT in your MUSCLECAR,
Street Rod, Truck, 4x4, or JEEP.
This is a 2-bolt Seasoned Heavy
Duty Chevy Small Block engine.
4-bolt heavy duty blocks also
Engine will run on unleaded fuel.
with your Power 2® engine?
More of what your Power 2® Engine PARTS include:
Your Power 2 Engine®
- Power 2® cam kit (computer controlled)
- Power 2® Comp hydraulic lifters
- Power 2® spring set, heavy duty (910 series sets)
- Edelbrock Throttle Body Injection included
- Heavy duty Stem steel intake valves 194
- Heavy duty Stem steel exhaust valves 1.5
- Premium positive valve seals, polyacrylate
- Heavy duty roller timing chain
- Controlled internal oil system (a P.E.R. exclusive!)
- Heavy duty, high volume Melling oil pump
- Heavy duty steel collar oil shaft
- Heavy duty oil pickup screen
- High quality Speed Pro hypereutectic pistons
- P.E.R.® Speed Pro High Performance
plasma molly rings
- Brass freeze plug kit
- High quality rear main seal double lip polyacrylate
- Fel Pro PermaTorque heavy duty gaskets and gasket
- Clevite Main bearings, Tri metal, high quality
- Clevite Rod bearings, Tri metal, high quality
- New rod nuts installed
- Cam bearings, high quality 360 Set
Your Power 2 Engine®
- P.E.R. 3-angle® valve
- Mill-matching surfaced heads
- Heavy duty thick wall valve guides
- Valve guides custom cut for posi-seals
- Jet vat block and magnifluxing
- Remove and replace all freeze plugs
- Remove and replace gallery plugs
- Remove and replace cam bearings
- Custom centerline boring of block
True 90 degree V8 centerline boring
- Power hone to fit pistons and rings
- Custom crank Micro polish radius oil holes
- Rods pressed off, then heat fitted
- Rods checked for alignment
- Street balancing
any changes needed, just call and we will build a custom
engine package for you with the horsepower you want. You
can also change the color, choosing from over 25 different
All our engines 327 - 350 - 383 - 396 -
427 - 454 and more are all custom hand built.
Call for our UPGRADED
ROLLER CAM package!
One of the unique facts about
Roller Cam combinations is the strong mid range torque it produces
along with great roller reliabilty of the engine. This Roller
Cam Combo has Low to Mid Pulling capabilities.
us a call for your application. Roller Cams improve power and
mileage and reduce friction and wear to create less
engine heat and wear each year. We are selling more and more Roller
Cam Engines. When you have one, you'll realize why.
Call to order this engine:
Toll Free 1-888-766-8044
08:00am - 5:00pm Monday - Friday
09:00am - 1:00pm Saturday
Times listed are Arizona time (-7 GMT).
Arizona does not observe Daylight Savings Time. We are on MST all year
This Power Engine®
is totally REBUILT in our Machine Shop by professionals from
start to finish. The Power Engine®
Performance Combination was developed from our over 44 years
of experience on MUSCLECARS, STREET STRIPS, CUSTOM TRUCKS, 4x4s,
and JEEPS. PhoenixEngine.com has built over 140,000 quality
engines to date.
Warranty and Shipping Info:
This engine has a one year written warranty. Buyer
pays actual shipping costs if unable to pick up engine from our
shop in Phoenix AZ. Some state freight restrictions apply. Payment
due in full prior to shipping. We accept Visa, Mastercard, Discover, money
orders, cashier's checks, and direct deposit. (GET
A DISCOUNT WITH
A DIRECT DEPOSIT!) Business or personal checks must clear prior
to shipping. Arizona residents must add 8.6% sales tax.
Call for core information.
SPECIAL PROMO!! Call NOW
for FREE SHIPPING to Southern California! We also offer
super shipping rates to all 48 continental states. Ask
about shipping to Hawaii, Alaska, and international destinations.
Call PhoenixEngine.com today to
Toll Free: 1-888-766-8044
Disclaimer: Please note that some parts are based
on availability. The brand names listed above are guidelines;
the exact brand name may not be available at the time
we build your engine. Pricing is deemed to be correct at time
of posting, but is not guaranteed. It is listed
as a guideline only. Please call us for complete
pricing on the engine built to your specific requirements.
These engines are built from our Dyno
tested packages in our shop and road proven.
Your specific engine can be Dyno tested individually for an additional cost.
Also ask about Fast Track engine testing for your engine, which is cheaper than Dyno testing!
Please be sure to read our full Disclaimer: CLICK HERE.
6/3/14 txt (140K engines & 44 yrs)
7/2/14 txt & pc
3/13/15 txt, pc (heads,rockers)
11/16/15 TBI pics
2/9/17 pc, txt
* Note: When we custom build your engine,
you can choose from over 25 different colors or you can
supply the paint to have your engine painted the same color
as your car's finish!
Please note photos may vary from actual product as all our engines
are custom built.